| Part Number : JM44LC33WD13NL | Manufacturer : J And M Products Inc | ||
| NSN : 5340-01-388-9119 (5340013889119) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 01-388-9119 (013889119) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JM44LC33WD13NL, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013889119, part number JM44LC33WD13NL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JM44LC33WD13NL | Manufacturer : J And M Products Inc | ||
| NSN Number : 5340-01-388-9119 (5340013889119) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 013889119 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number JM44LC33WD13NL, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013889119, part number JM44LC33WD13NL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-388-9119 Item PartTypeName: CLAMP,LOOP | 5340 | 013889119 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JM44LC33WD13NL | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | QQ-Q-250/5 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION |
| AAAP | Cushioning Environmental Protection | FUEL, AROMATIC AND FUEL RESISTANT |
| AZCY | Center To Center Distance Between Loop And Mounting Hole | 0.8620 INCHES MINIMUM AND 0.8920 INCHES MAXIMUM |
| STYL | Style Designator | SINGLE LOOP |
| ABMZ | Diameter | 0.2040 INCHES NOMINAL |
| MATT | Material | ALUMINUM ALLOY 2024 OVERALL AND ALUMINUM ALLOY 1230 OVERALL |
| AZDC | Distance From Loop Center To Tongue End | 1.1720 INCHES NOMINAL |
| ABPX | Material Thickness | 0.0500 INCHES NOMINAL |
| SFTT | Surface Treatment | CHROMATE OVERALL |
| MDCL | Material Document And Classification | -85052/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STDC | Surface Treatment Document And Classification | MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| BZTN | Loop Inside Diameter | 0.7080 INCHES MINIMUM AND 0.8280 INCHES MAXIMUM |
| AAAL | Tongue Hole Type | ROUND, UNTHREADED |
| MRC | Decoded Requirement | Clear Text Reply |
| ABMK | Overall Width | 0.5000 INCHES NOMINAL |
| MATT | Material | RUBBER BUTADIENE NITRILE CUSHION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
