| Part Number : JM44LC33WDC24HW | Manufacturer : J And M Products Inc | ||
| NSN : 5340-01-535-8856 (5340015358856) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 01-535-8856 (015358856) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JM44LC33WDC24HW, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340015358856, part number JM44LC33WDC24HW is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JM44LC33WDC24HW | Manufacturer : J And M Products Inc | ||
| NSN Number : 5340-01-535-8856 (5340015358856) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 015358856 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number JM44LC33WDC24HW, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340015358856, part number JM44LC33WDC24HW is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-535-8856 Item PartTypeName: CLAMP,LOOP | 5340 | 015358856 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TA025035WDC24HR | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | Material | ALUMINUM ALLOY BAND |
| ABPX | Material Thickness | 0.064 INCHES NOMINAL |
| FEAT | Special Features | DRAWING NAME CLAMP, LOOP TYPE CUSHIONED, SUPPORT(SELF RETAINING). |
| STYL | Style Designator | SINGLE LOOP |
| AGAV | End Item Identification | AIRCRAFT B-2 |
| MDCL | Material Document And Classification | MIL-C-8603 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION |
| MATT | Material | RUBBER SILICONE CLASS Q CUSHION |
| BZTN | Loop Inside Diameter | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
| ABMK | Overall Width | 0.500 INCHES NOMINAL |
| SFTT | Surface Treatment | CHROMATE BAND |
| STDC | Surface Treatment Document And Classification | MIL-C-5541 CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE CUSHION |
| AXWJ | Fastening Device Type | SNAP FASTENER |
| MDCL | Material Document And Classification | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| AAAL | Tongue Hole Type | ROUND, UNTHREADED |
| ABMZ | Diameter | 0.204 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | QQ-A-250/5 HEAT TREAT TO T42 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| MRC | Decoded Requirement | Clear Text Reply |
| AZDC | Distance From Loop Center To Tongue End | 1.544 INCHES NOMINAL |
| AZCY | Center To Center Distance Between Loop And Mounting Hole | 1.234 INCHES MINIMUM AND 1.264 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
