| Part Number : K660704-11 | Manufacturer : Kaman Aerospace Corporation | ||
| NSN : 5305-01-184-5928 (5305011845928) | |||
| Item Name : Setscrew | CAGE Code : 84955 | ||
| NIIN : 01-184-5928 (011845928) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: K66070411 | |||
Thank you for taking an interest in part number K660704-11, that of which is listed with the description Setscrew; Manufactured by Kaman Aerospace Corporation and listed alongside the NSN 5305011845928, part number K660704-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : K660704-11 | Manufacturer : Kaman Aerospace Corporation | ||
| NSN Number : 5305-01-184-5928 (5305011845928) | |||
| Item Name : Setscrew | CAGE Code : 84955 | ||
| NIIN : 011845928 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number K660704-11, that of which is listed with the description Setscrew; Manufactured by Kaman Aerospace Corporation and listed alongside the NSN 5305011845928, part number K660704-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-184-5928 Item PartTypeName: SETSCREW | 5305 | 011845928 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| K660704-11 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.053 INCHES MAXIMUM |
| AAUY | POINT LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.195 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 100000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON FLATS |
| CWDK | POINT CHAMFER ANGLE | 90.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CHROMATE AND CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
