| Part Number : 910H75 | Manufacturer : Kandel Knitting Mills Inc | ||
| NSN : 6110-00-500-3175 (6110005003175) | |||
| Item Name : Starter Motor | CAGE Code : 6X411 | ||
| NIIN : 00-500-3175 (005003175) | |||
| FSC Code : 6110 Electrical Control Equipment | |||
| FSG Code : 61 Electric Wire and Power and Distribution Equipment | |||
| INC Code : 00905 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 910H75, that of which is listed with the description Starter Motor; Manufactured by Kandel Knitting Mills Inc and listed alongside the NSN 6110005003175, part number 910H75 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 910H75 | Manufacturer : Kandel Knitting Mills Inc | ||
| NSN Number : 6110-00-500-3175 (6110005003175) | |||
| Item Name : Starter Motor | CAGE Code : 6X411 | ||
| NIIN : 005003175 | |||
| FSC CODE : 6110 Electrical Control Equipment | |||
Thank you for taking an interest in part number 910H75, that of which is listed with the description Starter Motor; Manufactured by Kandel Knitting Mills Inc and listed alongside the NSN 6110005003175, part number 910H75 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6110-00-500-3175 Item PartTypeName: STARTER,MOTOR | 6110 | 005003175 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 910H75 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABBB | SPEED ADJUSTMENTS | SINGLE SPEED |
| ABHP | OVERALL LENGTH | 2.562 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 4.125 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.375 INCHES NOMINAL |
| ABUS | POWER RATING | 0.750 HORSEPOWER AND 1.000 HORSEPOWER |
| ACYN | AC VOLTAGE RATING | 110.0 VOLTS MINIMUM AND 220.0 VOLTS MAXIMUM |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AFLW | ACTUATION METHOD | MANUAL |
| AGLD | PERFORMANCE TYPE | SEMIAUTOMATIC |
| AJXE | SIZE DESIGNATOR | 00 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ALGC | MOUNTING CONFIGURATION | TWO 3/16 IN. DIA MTG HOLES LOCATED DIAGONALLY AT OPPOSITE TOP AND BOTTOM CORNERS OF ENCLOSURE,SPACED 3.718 IN. C TO C |
| ANCN | OPERATING VOLTAGE CHARACTERISTIC | FULL |
| ANCY | UNABLE TO DECODE | UNABLE TO DECODE AND UNABLE TO DECODE |
| ANDW | LOAD PROTECTION TYPE | OVERLOAD |
| ANDX | AMBIENT TEMP | 40.0 DEG CELSIUS |
| ANPZ | INCLOSURE FEATURE | DUSTPROOF |
| ANQC | NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN | DESIGNED PER NEMA STD |
| ANRK | SWITCH FUNCTIONAL POSITIONS | OFF AND ON |
| AQZF | CONTROL TYPE | LOCAL |
| FAAZ | PHASE | SINGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
