| Part Number : KD80AH | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN : 3110-00-844-5155 (3110008445155) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 32828 | ||
| NIIN : 00-844-5155 (008445155) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number KD80AH, that of which is listed with the description Bearing Ball Annular; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110008445155, part number KD80AH is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
20th century spring mfg
CAGE Code: 0PZE8 |
21st century paramount inc
CAGE Code: 55428 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
4 m company inc
CAGE Code: 1K407,57268 |
|
3s group inc
CAGE Code: 07CN0 |
2001 humana press inc
CAGE Code: 34CH3 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
184th air refueling wing
CAGE Code: 3EP27 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
3 dimensional engineering inc
CAGE Code: 1HLX4 |
|
3m deutschland gmbh
CAGE Code: D2607 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
200 park inc
CAGE Code: 3CKS7 |
2001 micro systemation ab
CAGE Code: SK396 |
|
3m health care service center
CAGE Code: 0UTW7 |
| Part Number : KD80AH | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN Number : 3110-00-844-5155 (3110008445155) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 32828 | ||
| NIIN : 008445155 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number KD80AH, that of which is listed with the description Bearing Ball Annular; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110008445155, part number KD80AH is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-844-5155 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 008445155 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| KD80AH | C | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RING,NON-SEPARABLE |
| ABMK | OVERALL WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 7.9988 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 8.9988 INCHES MINIMUM AND 9.0000 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| MATT | MATERIAL | STEEL OUTER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
