| Part Number : 8844-1 | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN : 3110-01-010-2476 (3110010102476) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 32828 | ||
| NIIN : 01-010-2476 (010102476) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 88441 | |||
Thank you for taking an interest in part number 8844-1, that of which is listed with the description Bearing Ball Annular; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110010102476, part number 8844-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3d evolution ltd
CAGE Code: KD959 |
3m norge a s
CAGE Code: N0447 |
|
394 test maintenance squadron sac
CAGE Code: 33044 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
3 star papers limited
CAGE Code: 3DNS9 |
21st century optics inc
CAGE Code: 0TN38 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
360 tents l l c
CAGE Code: 4CT45 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
3 d machining inc
CAGE Code: 09SY7 |
3com sas
CAGE Code: F9930 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
| Part Number : 8844-1 | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN Number : 3110-01-010-2476 (3110010102476) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 32828 | ||
| NIIN : 010102476 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 8844-1, that of which is listed with the description Bearing Ball Annular; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110010102476, part number 8844-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-010-2476 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 010102476 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2534589 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 8.4995 INCHES MINIMUM AND 8.5000 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AGZK | INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | OUTWARD CONVERGENT |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RING,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
