| Part Number : 5092021 | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN : 3110-01-187-1940 (3110011871940) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 32828 | ||
| NIIN : 01-187-1940 (011871940) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 5092021, that of which is listed with the description Bearing Ball Duplex; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110011871940, part number 5092021 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5092021 | Manufacturer : Kaydon Ring And Seal Inc | ||
| NSN Number : 3110-01-187-1940 (3110011871940) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 32828 | ||
| NIIN : 011871940 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 5092021, that of which is listed with the description Bearing Ball Duplex; Manufactured by Kaydon Ring And Seal Inc and listed alongside the NSN 3110011871940, part number 5092021 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-187-1940 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011871940 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 930025 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.4700 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 3.9997 INCHES MINIMUM AND 4.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 4.4997 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHQ | BEARING PRELOAD RATING | 30.0 POUNDS NOMINAL |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-81846 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC SEPARATOR |
| MATT | MATERIAL | STEEL CORROSION RESISTING BALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING INNER RACE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OUTER RACE |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
