| Part Number : CM01014110 | Manufacturer : Kearfott Corporation | ||
| NSN : 5990-01-355-8875 (5990013558875) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 05088 | ||
| NIIN : 01-355-8875 (013558875) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 15289 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number CM01014110, that of which is listed with the description Synchro Control Transformer; Manufactured by Kearfott Corporation and listed alongside the NSN 5990013558875, part number CM01014110 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CM01014110 | Manufacturer : Kearfott Corporation | ||
| NSN Number : 5990-01-355-8875 (5990013558875) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 05088 | ||
| NIIN : 013558875 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number CM01014110, that of which is listed with the description Synchro Control Transformer; Manufactured by Kearfott Corporation and listed alongside the NSN 5990013558875, part number CM01014110 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-355-8875 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 013558875 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM01014110 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| ABHP | OVERALL LENGTH | 1.6300 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4150 INCHES NOMINAL SINGLE SHAFT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 45.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6910 INCHES NOMINAL |
| AJSL | BODY SIZE | 8 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 0.54 WATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.00 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL INCHES |
| CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 96214-530500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.00 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 113.0 MILLIAMPERES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 37.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 260.00 NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
