| Part Number : 293-1234 | Manufacturer : Kemtek Xtals Inc | ||
| NSN : 5915-01-043-4387 (5915010434387) | |||
| Item Name : Filter Band Pass | CAGE Code : 1HP10 | ||
| NIIN : 01-043-4387 (010434387) | |||
| FSC Code : 5915 Filters and Networks | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 00209 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2931234 | |||
Thank you for taking an interest in part number 293-1234, that of which is listed with the description Filter Band Pass; Manufactured by Kemtek Xtals Inc and listed alongside the NSN 5915010434387, part number 293-1234 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 293-1234 | Manufacturer : Kemtek Xtals Inc | ||
| NSN Number : 5915-01-043-4387 (5915010434387) | |||
| Item Name : Filter Band Pass | CAGE Code : 1HP10 | ||
| NIIN : 010434387 | |||
| FSC CODE : 5915 Filters and Networks | |||
Thank you for taking an interest in part number 293-1234, that of which is listed with the description Filter Band Pass; Manufactured by Kemtek Xtals Inc and listed alongside the NSN 5915010434387, part number 293-1234 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5915-01-043-4387 Item PartTypeName: FILTER,BAND PASS | 5915 | 010434387 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 293-1234-010 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 1.108 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 2.000 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.000 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.750 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.000 INCHES NOMINAL |
| AECR | VIBRATION RESISTANCE RANGE IN HERTZ | 10.0 TO 500.0 |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 91.0 DEG CELSIUS |
| AFSV | AVERAGE LIFE RATING IN HOURS | 1000.0 |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 18.0 MEGAHERTZ BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 5.0 KILOHMS BLANK |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 2.5 KILOHMS BLANK |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | CRYSTAL BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 4.0 BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 PIN INPUT 1ST FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 PIN OUTPUT 2ND FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 17.9835 MEGAHERTZ BLANK AND 17.991 MEGAHERTZ BLANK AND 18.009 MEGAHERTZ BLANK AND 18.0165 MEGAHERTZ BLANK |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| CQRG | BODY MATERIAL | METAL |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 17.991 MEGAHERTZ BLANK AND 18.009 MEGAHERTZ BLANK |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 60.0 MINIMUM BLANK AND 6.0 MAXIMUM BLANK 1ST FUNCTION |
| FEAT | SPECIAL FEATURES | TERMINALS 1 AND 3 GROUND; COMMON TO CASE |
| STYL | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST | TEST DATA DOCUMENT | 13499-293-1234 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
