| Part Number : 1103E | Manufacturer : Kendick Mfg Co | ||
| NSN : 5905-00-836-6004 (5905008366004) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10105 | ||
| NIIN : 00-836-6004 (008366004) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1103E, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Kendick Mfg Co and listed alongside the NSN 5905008366004, part number 1103E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1103E | Manufacturer : Kendick Mfg Co | ||
| NSN Number : 5905-00-836-6004 (5905008366004) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10105 | ||
| NIIN : 008366004 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 1103E, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Kendick Mfg Co and listed alongside the NSN 5905008366004, part number 1103E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-836-6004 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008366004 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 227881-1 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABPC | UNDERCUT WIDTH | 0.0580 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.562 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.281 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -650.0/650.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.062 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9975 INCHES MINIMUM AND 1.0025 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 60.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0880 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0560 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 353.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.075 INCH-OUNCES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 HEAT SINK SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 7.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
