| Part Number : 1103C | Manufacturer : Kendick Mfg Co | ||
| NSN : 5905-00-836-7849 (5905008367849) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10105 | ||
| NIIN : 00-836-7849 (008367849) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1103C, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Kendick Mfg Co and listed alongside the NSN 5905008367849, part number 1103C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1103C | Manufacturer : Kendick Mfg Co | ||
| NSN Number : 5905-00-836-7849 (5905008367849) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10105 | ||
| NIIN : 008367849 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 1103C, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Kendick Mfg Co and listed alongside the NSN 5905008367849, part number 1103C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-836-7849 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008367849 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 227881-2 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVM | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.531 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.0025 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.093 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.031 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0930 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.437 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.125 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS 1ST SECTION AND 1.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -650.0 TO 650.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 HEAT SINK ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 7.0 1ST SECTION AND-3.0 TO 3.0 2ND SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 1.0300 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.500 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 353.0 NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
