| Part Number : 50268 | Manufacturer : Kleinschmidt Inc | ||
| NSN : 3020-00-351-7893 (3020003517893) | |||
| Item Name : Gear Worm | CAGE Code : 82423 | ||
| NIIN : 00-351-7893 (003517893) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05467 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 50268, that of which is listed with the description Gear Worm; Manufactured by Kleinschmidt Inc and listed alongside the NSN 3020003517893, part number 50268 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 50268 | Manufacturer : Kleinschmidt Inc | ||
| NSN Number : 3020-00-351-7893 (3020003517893) | |||
| Item Name : Gear Worm | CAGE Code : 82423 | ||
| NIIN : 003517893 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 50268, that of which is listed with the description Gear Worm; Manufactured by Kleinschmidt Inc and listed alongside the NSN 3020003517893, part number 50268 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-351-7893 Item PartTypeName: GEAR,WORM | 3020 | 003517893 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 50268 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 0.5625 INCHES NOMINAL |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM OVERALL AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.622 INCHES |
| CWPC | THREAD FORM QUANTITY | 2 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 6.3332 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 0.375 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
