| Part Number : 51564 | Manufacturer : Kleinschmidt Inc | ||
| NSN : 5315-00-356-3506 (5315003563506) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 82423 | ||
| NIIN : 00-356-3506 (003563506) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 51564, that of which is listed with the description Pin Grooved Headless; Manufactured by Kleinschmidt Inc and listed alongside the NSN 5315003563506, part number 51564 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 51564 | Manufacturer : Kleinschmidt Inc | ||
| NSN Number : 5315-00-356-3506 (5315003563506) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 82423 | ||
| NIIN : 003563506 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 51564, that of which is listed with the description Pin Grooved Headless; Manufactured by Kleinschmidt Inc and listed alongside the NSN 5315003563506, part number 51564 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-356-3506 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 003563506 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 51564 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 1.469 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.1855 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 1.349 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES SMALL END |
| FEAT | SPECIAL FEATURES | FLAT0.250 IN. LG BY 0.156 IN. DEEP 0.125 IN. IN FROM OPPOSITE END OF GROOVE |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | KL1-F1101,FSCM 82423 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
