| Part Number : 52872 | Manufacturer : Kleinschmidt Inc | ||
| NSN : 5315-00-597-9673 (5315005979673) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 82423 | ||
| NIIN : 00-597-9673 (005979673) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 52872, that of which is listed with the description Pin Grooved Headless; Manufactured by Kleinschmidt Inc and listed alongside the NSN 5315005979673, part number 52872 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 52872 | Manufacturer : Kleinschmidt Inc | ||
| NSN Number : 5315-00-597-9673 (5315005979673) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 82423 | ||
| NIIN : 005979673 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 52872, that of which is listed with the description Pin Grooved Headless; Manufactured by Kleinschmidt Inc and listed alongside the NSN 5315005979673, part number 52872 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-597-9673 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 005979673 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 52872 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 1.016 INCHES MINIMUM AND 1.047 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.828 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
