| Part Number : CR3552P5-02 | Manufacturer : Klx Aerospace Solutions Ii Sas | ||
| NSN : 5320-01-547-5303 (5320015475303) | |||
| Item Name : Rivet Blind | CAGE Code : F7652 | ||
| NIIN : 01-547-5303 (015475303) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: CR3552P502 | |||
Thank you for taking an interest in part number CR3552P5-02, that of which is listed with the description Rivet Blind; Manufactured by Klx Aerospace Solutions Ii Sas and listed alongside the NSN 5320015475303, part number CR3552P5-02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CR3552P5-02 | Manufacturer : Klx Aerospace Solutions Ii Sas | ||
| NSN Number : 5320-01-547-5303 (5320015475303) | |||
| Item Name : Rivet Blind | CAGE Code : F7652 | ||
| NIIN : 015475303 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number CR3552P5-02, that of which is listed with the description Rivet Blind; Manufactured by Klx Aerospace Solutions Ii Sas and listed alongside the NSN 5320015475303, part number CR3552P5-02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-547-5303 Item PartTypeName: RIVET,BLIND | 5320 | 015475303 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CR3552P5-02 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | PLAIN STEM-TYPE T |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| ANEE | GRIP LENGTH | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS5657 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AASB | FASTENER LENGTH | 0.266 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE LOCKING RING ALUMINUM SLEEVE |
| CRSQ | COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAZF | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| AGAV | III END ITEM IDENTIFICATION | A-10 AIRCRAFT |
| AAZG | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING |
| MATT | MATERIAL | IRON ALLOY 660 OR STEEL COMP 304 LOCKING RING NICKEL ALLOY R-405 OR NICKEL ALLOY K-500 SLEEVE STEEL COMP 632 STEM |
| FEAT | SPECIAL FEATURES | ALUMINUM EPOXY SPRAY COATED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
