| Part Number : 5220 | Manufacturer : Koehring Cranes Inc | ||
| NSN : 3020-00-425-7115 (3020004257115) | |||
| Item Name : Gear Helical | CAGE Code : 59690 | ||
| NIIN : 00-425-7115 (004257115) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 5220, that of which is listed with the description Gear Helical; Manufactured by Koehring Cranes Inc and listed alongside the NSN 3020004257115, part number 5220 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5220 | Manufacturer : Koehring Cranes Inc | ||
| NSN Number : 3020-00-425-7115 (3020004257115) | |||
| Item Name : Gear Helical | CAGE Code : 59690 | ||
| NIIN : 004257115 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 5220, that of which is listed with the description Gear Helical; Manufactured by Koehring Cranes Inc and listed alongside the NSN 3020004257115, part number 5220 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-425-7115 Item PartTypeName: GEAR,HELICAL | 3020 | 004257115 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5220 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AGJS | PITCH DIAMETER | 7.3120 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 49 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.3120 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.767 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 23.4167 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.329 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.438 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.249 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.378 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.317 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | 1/16 IN. BY 45 DEG CHAMFER ON BORE FIRST END,RAISED BOSS ON HUB OVER KEYWAY 0.625 WIDE |
| MATT | MATERIAL | STEEL COMP 8620 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE 8620 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
