| Part Number : 165617 | Manufacturer : Komatsu American Intl Co | ||
| NSN : 3020-00-042-4285 (3020000424285) | |||
| Item Name : Gear Spur | CAGE Code : 29510 | ||
| NIIN : 00-042-4285 (000424285) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 165617, that of which is listed with the description Gear Spur; Manufactured by Komatsu American Intl Co and listed alongside the NSN 3020000424285, part number 165617 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 165617 | Manufacturer : Komatsu American Intl Co | ||
| NSN Number : 3020-00-042-4285 (3020000424285) | |||
| Item Name : Gear Spur | CAGE Code : 29510 | ||
| NIIN : 000424285 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 165617, that of which is listed with the description Gear Spur; Manufactured by Komatsu American Intl Co and listed alongside the NSN 3020000424285, part number 165617 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-042-4285 Item PartTypeName: GEAR,SPUR | 3020 | 000424285 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3492H138 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSA | SPLINE QUANTITY | 9 BOTH ENDS |
| AGJS | PITCH DIAMETER | 6.6250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 53 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.5625 INCHES NOMINAL BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.875 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.313 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.625 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| CWWH | END NOMINAL LENGTH | 0.031 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 1.000 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.150 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.250 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.156 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.688 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 1.182 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 5.500 INCHES SECOND END |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.031 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 1.500 INCHES FIRST END |
| MATT | MATERIAL | IRON CAST OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
