| Part Number : K323879 | Manufacturer : Korody Colyer Corp | ||
| NSN : 3020-00-391-4050 (3020003914050) | |||
| Item Name : Gear Helical | CAGE Code : 18954 | ||
| NIIN : 00-391-4050 (003914050) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number K323879, that of which is listed with the description Gear Helical; Manufactured by Korody Colyer Corp and listed alongside the NSN 3020003914050, part number K323879 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : K323879 | Manufacturer : Korody Colyer Corp | ||
| NSN Number : 3020-00-391-4050 (3020003914050) | |||
| Item Name : Gear Helical | CAGE Code : 18954 | ||
| NIIN : 003914050 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number K323879, that of which is listed with the description Gear Helical; Manufactured by Korody Colyer Corp and listed alongside the NSN 3020003914050, part number K323879 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-4050 Item PartTypeName: GEAR,HELICAL | 3020 | 003914050 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| K-3238729 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 10.8000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM OVERALL AND 16.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 11.084 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STUB |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 27.3217 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.938 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 1.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0000 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.997 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.997 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | 2 COUNTERWEIGHTS,OIL PLUG,2 RIVETS,2 COUNTERWEIGHT HOLES 5/8 IN. DIA LOCATED 3 IN. BELOW CENTER OF BORE AND 2 IN. TO LEFT AND RIGHT OF LOWER VERTICAL CENTER LINE,FIGURE 6 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 36 DEG 11 |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
