Part Number : 02-83-081-1 | Manufacturer : Kreonite Inc | ||
NSN : 5360-01-319-3782 (5360013193782) | |||
Item Name : Spring Flat Nonmetallic | CAGE Code : 08836 | ||
NIIN : 01-319-3782 (013193782) | |||
FSC Code : 5360 Coil Flat Leaf and Wire Springs | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 77777 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 02830811 |
Thank you for taking an interest in part number 02-83-081-1, that of which is listed with the description Spring Flat Nonmetallic; Manufactured by Kreonite Inc and listed alongside the NSN 5360013193782, part number 02-83-081-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 02-83-081-1 | Manufacturer : Kreonite Inc | ||
NSN Number : 5360-01-319-3782 (5360013193782) | |||
Item Name : Spring Flat Nonmetallic | CAGE Code : 08836 | ||
NIIN : 013193782 | |||
FSC CODE : 5360 Coil Flat Leaf and Wire Springs |
Thank you for taking an interest in part number 02-83-081-1, that of which is listed with the description Spring Flat Nonmetallic; Manufactured by Kreonite Inc and listed alongside the NSN 5360013193782, part number 02-83-081-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5360-01-319-3782 Item PartTypeName: SPRING,FLAT,NONMETALLIC | 5360 | 013193782 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
02-83-081-1 | 5 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AGAV | END ITEM IDENTIFICATION | IDLER ARM ASSY,FILM PROCESSOR |
TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | REQUIRES 0.493 OZ. PLASTIC (POLY T),MOLDED; MATERIAL HAS A RECTANGULAR CROSS SECTION 0.375 IN. WIDE BY 0.125 IN. HIGH; ONE END HAS A HOOK WITH A 0.531 IN. DIA.,THE OTHER END HAS A LOOP WITH A 0.740 IN. DIA.; SQUARE TABS AT EACH END OF THE L |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote