| Part Number : 360D1-0558 | Manufacturer : Kurz And Root Generator Company Llc | ||
| NSN : 3020-00-554-9029 (3020005549029) | |||
| Item Name : Gear Helical | CAGE Code : 75377 | ||
| NIIN : 00-554-9029 (005549029) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 360D10558 | |||
Thank you for taking an interest in part number 360D1-0558, that of which is listed with the description Gear Helical; Manufactured by Kurz And Root Generator Company Llc and listed alongside the NSN 3020005549029, part number 360D1-0558 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 360D1-0558 | Manufacturer : Kurz And Root Generator Company Llc | ||
| NSN Number : 3020-00-554-9029 (3020005549029) | |||
| Item Name : Gear Helical | CAGE Code : 75377 | ||
| NIIN : 005549029 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 360D1-0558, that of which is listed with the description Gear Helical; Manufactured by Kurz And Root Generator Company Llc and listed alongside the NSN 3020005549029, part number 360D1-0558 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-554-9029 Item PartTypeName: GEAR,HELICAL | 3020 | 005549029 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GA36A | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 2.5370 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.7305 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 18.7665 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.4985 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.155 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.8337 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK LOCATED 45 DEG CW FROM CENTER LINE OF KEYWAY,DRILL POINT ON CENTER LINE OF A TOOTH,0.062 IN. BY 45 DEG CHAMFER OF BORE 1ST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
