| Part Number : 517868 | Manufacturer : L3 Technologies Inc | ||
| NSN : 3020-00-734-6544 (3020007346544) | |||
| Item Name : Gear Bevel | CAGE Code : 02978 | ||
| NIIN : 00-734-6544 (007346544) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05463 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 517868, that of which is listed with the description Gear Bevel; Manufactured by L3 Technologies Inc and listed alongside the NSN 3020007346544, part number 517868 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 517868 | Manufacturer : L3 Technologies Inc | ||
| NSN Number : 3020-00-734-6544 (3020007346544) | |||
| Item Name : Gear Bevel | CAGE Code : 02978 | ||
| NIIN : 007346544 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 517868, that of which is listed with the description Gear Bevel; Manufactured by L3 Technologies Inc and listed alongside the NSN 3020007346544, part number 517868 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-734-6544 Item PartTypeName: GEAR,BEVEL | 3020 | 007346544 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5702703 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 2.2000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.500 INCHES |
| CWTR | HUB STYLE DESIGNATOR | 2 GROOVES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.560 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAQL | BODY STYLE | PLAIN,SOLID |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.397 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 2.682 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWQD | PITCH ANGLE | 36.2539 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.120 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.562 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 0.750 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.312 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.470 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.000 INCHES FIRST END |
| CWYR | SECOND GROOVE NOMINAL WIDTH | 0.560 INCHES FIRST END |
| CWYW | SECOND GROOVE NOMINAL DIAMETER | 1.190 INCHES FIRST END |
| CWZC | NOMINAL DISTANCE FROM END TO SECOND GROOVE | 1.280 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 32 INVOLUTE EXTERNAL SPLINES ON HUB END,30 DEG PRESSURE ANGLE,0.560 IN. LG OF SPLINES |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,FRONT HUB RECESSED,BACK HUB PROTRUDING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
