| Part Number : 517878 | Manufacturer : L3 Technologies Inc | ||
| NSN : 3020-00-734-6548 (3020007346548) | |||
| Item Name : Gear Bevel | CAGE Code : 02978 | ||
| NIIN : 00-734-6548 (007346548) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05463 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 517878, that of which is listed with the description Gear Bevel; Manufactured by L3 Technologies Inc and listed alongside the NSN 3020007346548, part number 517878 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 517878 | Manufacturer : L3 Technologies Inc | ||
| NSN Number : 3020-00-734-6548 (3020007346548) | |||
| Item Name : Gear Bevel | CAGE Code : 02978 | ||
| NIIN : 007346548 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 517878, that of which is listed with the description Gear Bevel; Manufactured by L3 Technologies Inc and listed alongside the NSN 3020007346548, part number 517878 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-734-6548 Item PartTypeName: GEAR,BEVEL | 3020 | 007346548 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 517878 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AJLA | TEETH QUANTITY | 29 |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM TEETH AND 62.0 ROCKWELL C MAXIMUM TEETH |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 12 PLAIN AXIALLY THROUGH BODY,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 4.3207 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 2.317 INCHES |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 2.677 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.120 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABSA | SPLINE QUANTITY | 33 BOTH ENDS |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 4.1429 INCHES NOMINAL |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 1.6500 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM BODY AND 34.0 ROCKWELL C MAXIMUM BODY |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 42.1844 DEGREES |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.1170 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.672 INCHES BOTH ENDS |
| CWRX | BORE NOMINAL DEPTH | 2.317 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.473 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.407 INCHES AXIALLY THROUGH BODY,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 5.375 INCHES AXIALLY THROUGH BODY,FIRST END |
| FEAT | SPECIAL FEATURES | TOOTH PRESSURE ANGLE 30.0 DEG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
