| Part Number : METALMASTER16IN | Manufacturer : Lake Region Development Co Inc | ||
| NSN : 3416-00-186-4067 (3416001864067) | |||
| Item Name : Lathe Engine | CAGE Code : 08303 | ||
| NIIN : 00-186-4067 (001864067) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number METALMASTER16IN, that of which is listed with the description Lathe Engine; Manufactured by Lake Region Development Co Inc and listed alongside the NSN 3416001864067, part number METALMASTER16IN is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2connect it b v
CAGE Code: HG221 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
3h industries inc
CAGE Code: 60754 |
2101 llc
CAGE Code: 1GH76 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
3m health care ltd
CAGE Code: U5989 |
|
313 aerospace llc
CAGE Code: 3VEK3 |
5605 n illinois inc
CAGE Code: 089F4 |
|
1 source electronics inc
CAGE Code: 551K1 |
3m unitek corporation
CAGE Code: 90444 |
|
1st american metals inc
CAGE Code: 0MP49 |
3m france
CAGE Code: F0347 |
|
21st century optics inc
CAGE Code: 0TN38 |
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
|
4 m company inc
CAGE Code: 1K407,57268 |
| Part Number : METALMASTER16IN | Manufacturer : Lake Region Development Co Inc | ||
| NSN Number : 3416-00-186-4067 (3416001864067) | |||
| Item Name : Lathe Engine | CAGE Code : 08303 | ||
| NIIN : 001864067 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number METALMASTER16IN, that of which is listed with the description Lathe Engine; Manufactured by Lake Region Development Co Inc and listed alongside the NSN 3416001864067, part number METALMASTER16IN is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 16.0 TO 400.0 |
| BTTF | ACTUAL SWING OVER BED | 18.500 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 12.000 INCHES NOMINAL |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| AWHA | BED TYPE | SOLID |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ACDC | CURRENT TYPE | AC |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 72 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTZR | THREAD QUANTITY RANGE | 1.0 TO 224.0 PER INCH |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| APGF | DESIGN TYPE | SCREW |
| FAAZ | PHASE | THREE |
| AAXX | MOUNTING TYPE | FLOOR |
| BTTD | RATED SWING | 16.000 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 72 |
| ADQR | CENTER TO CENTER DISTANCE | 42.000 INCHES NOMINAL |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 MORSE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
