| Part Number : ALB509-12 | Manufacturer : Lamsco West Inc | ||
| NSN : 5310-00-959-2066 (5310009592066) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 75497 | ||
| NIIN : 00-959-2066 (009592066) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: ALB50912 | |||
Thank you for taking an interest in part number ALB509-12, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lamsco West Inc and listed alongside the NSN 5310009592066, part number ALB509-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ALB509-12 | Manufacturer : Lamsco West Inc | ||
| NSN Number : 5310-00-959-2066 (5310009592066) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 75497 | ||
| NIIN : 009592066 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number ALB509-12, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lamsco West Inc and listed alongside the NSN 5310009592066, part number ALB509-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-959-2066 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 009592066 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS5990-12 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | 250.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
