| Part Number : 12412743-01 | Manufacturer : Landoll Corporation | ||
| NSN : 4720-01-426-7040 (4720014267040) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 65459 | ||
| NIIN : 01-426-7040 (014267040) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1241274301 | |||
Thank you for taking an interest in part number 12412743-01, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Landoll Corporation and listed alongside the NSN 4720014267040, part number 12412743-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 12412743-01 | Manufacturer : Landoll Corporation | ||
| NSN Number : 4720-01-426-7040 (4720014267040) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 65459 | ||
| NIIN : 014267040 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 12412743-01, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Landoll Corporation and listed alongside the NSN 4720014267040, part number 12412743-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-426-7040 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014267040 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F2420637-6-6-6-31.28 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 2B 2ND END |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| CQCS | Layer Composition And Location | 2ND LAYER BRAIDED STEEL WIRE |
| CRWL | Inside Surface Condition | SMOOTH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AAJD | Thread Class | 2B 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CQGM | Maximum Operating Pressure | 3000.0 POUNDS PER SQUARE INCH |
| THSD | Thread Series Designator | UNJF 2ND END |
| THSD | Thread Series Designator | UNJF 1ST END |
| CRJM | Outer Covering Environmental Protection | OZONE RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRDW | Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 31.280 INCHES NOMINAL OVERALL |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AGAV | End Item Identification | 2320-01-354-4528; AN/AVR-2, LASER DETECITNG SET |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| CQBD | Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH |
| CQJX | Nominal Thread Size | 0.562 INCHES 2ND END |
| ABKV | Outside Diameter | 0.840 INCHES NOMINAL |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX | Inside Diameter | 0.375 INCHES NOMINAL |
| ACKH | Minimum Inside Bending Radius | 5.000 INCHES |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| CQJX | Nominal Thread Size | 0.562 INCHES 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AHNC | Connection Style | SWIVEL NUT FLARE 2ND END |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE |
| ABJH | Temp Rating | -50.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
