| Part Number : NT2-551 | Manufacturer : Leica Geosystems Inc | ||
| NSN : 6675-00-974-7363 (6675009747363) | |||
| Item Name : Holder Case Assembl | CAGE Code : 35643 | ||
| NIIN : 00-974-7363 (009747363) | |||
| FSC Code : 6675 Drafting Surveying And Mapping Instruments | |||
| FSG Code : 66 Instruments and Laboratory Equipment | |||
| INC Code : 77777 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: NT2551 | |||
Thank you for taking an interest in part number NT2-551, that of which is listed with the description Holder Case Assembl; Manufactured by Leica Geosystems Inc and listed alongside the NSN 6675009747363, part number NT2-551 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NT2-551 | Manufacturer : Leica Geosystems Inc | ||
| NSN Number : 6675-00-974-7363 (6675009747363) | |||
| Item Name : Holder Case Assembl | CAGE Code : 35643 | ||
| NIIN : 009747363 | |||
| FSC CODE : 6675 Drafting Surveying And Mapping Instruments | |||
Thank you for taking an interest in part number NT2-551, that of which is listed with the description Holder Case Assembl; Manufactured by Leica Geosystems Inc and listed alongside the NSN 6675009747363, part number NT2-551 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-5 | MANUFACTURERS CODE | 35643 |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | 1ST AND 2ND END W/BEND 24.0 MM LG,20.0 MM FROM CENTER TO END OF BEND,10 DEG,3 R,66.0 MM O/A LG,16.0 MM O/A W,50.0 MM SPACING BETWEEN 1ST AND 2ND END |
| SR-5 | DESIGN CONTROL REFERENCE | NT2-551 |
| SR-5 | THE MANUFACTURERS DATA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
