| Part Number : HL6587TW10 13 | Manufacturer : Lisi Aerospace Canada Corp | ||
| NSN : 5320-01-527-3950 (5320015273950) | |||
| Item Name : Pin Rivet | CAGE Code : L4528 | ||
| NIIN : 01-527-3950 (015273950) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 67165 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number HL6587TW10 13, that of which is listed with the description Pin Rivet; Manufactured by Lisi Aerospace Canada Corp and listed alongside the NSN 5320015273950, part number HL6587TW10 13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HL6587TW10 13 | Manufacturer : Lisi Aerospace Canada Corp | ||
| NSN Number : 5320-01-527-3950 (5320015273950) | |||
| Item Name : Pin Rivet | CAGE Code : L4528 | ||
| NIIN : 015273950 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number HL6587TW10 13, that of which is listed with the description Pin Rivet; Manufactured by Lisi Aerospace Canada Corp and listed alongside the NSN 5320015273950, part number HL6587TW10 13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-527-3950 Item PartTypeName: PIN-RIVET | 5320 | 015273950 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HL6587TW10-13 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CWBJ | COLLAR STYLE | THREADED BREAK OFF TYPE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | CADMIUM BODY |
| CQSX | SHEAR STRENGTH | 6130 DOUBLE POUNDS PER SQUARE INCH |
| AAZU | TIP DIAMETER | 0.181 INCHES MINIMUM AND 0.184 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.201 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABAB | COLLAR OVERALL HEIGHT | 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM |
| ABAA | COLLAR OUTSIDE DIAMETER | 0.303 INCHES MINIMUM AND 0.307 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AAZF | SHANK STYLE | PIN-RIVET, TAPERED, THREADED |
| AGAV | END ITEM IDENTIFICATION | HELICOPTER CH-53G |
| ABCJ | COLLAR INSIDE DIAMETER | 0.340 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
