| Part Number : 268-12961-15 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 3110-01-140-5803 (3110011405803) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 09205 | ||
| NIIN : 01-140-5803 (011405803) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2681296115 | |||
Thank you for taking an interest in part number 268-12961-15, that of which is listed with the description Bearing Ball Duplex; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3110011405803, part number 268-12961-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3ps inc
CAGE Code: 1MHK2 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3gen corporation
CAGE Code: 3SPS3 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
3nity products llc
CAGE Code: 8HDM8 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
498 msug
CAGE Code: 5VW08 |
|
313 aerospace llc
CAGE Code: 3VEK3 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
2709th af vehicle control group
CAGE Code: 10994 |
2101 llc
CAGE Code: 1GH76 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
| Part Number : 268-12961-15 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 3110-01-140-5803 (3110011405803) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 09205 | ||
| NIIN : 011405803 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 268-12961-15, that of which is listed with the description Bearing Ball Duplex; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3110011405803, part number 268-12961-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-140-5803 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011405803 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 268-12961-15 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.2000 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2498 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGAV | END ITEM IDENTIFICATION | AIM9E/J/P |
| AGYE | SURFACE FINISH | UNGROUND |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | 0.0007 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | FLANGED 0.0210 MIN 0.0230 MAX WIDE W/CHAMFER 0.0020 ON INSIDE CORNER |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440A OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
