| Part Number : 1292035-103 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 3110-01-211-7519 (3110012117519) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 98897 | ||
| NIIN : 01-211-7519 (012117519) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1292035103 | |||
Thank you for taking an interest in part number 1292035-103, that of which is listed with the description Bearing Roller Rod End; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3110012117519, part number 1292035-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1292035-103 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 3110-01-211-7519 (3110012117519) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 98897 | ||
| NIIN : 012117519 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 1292035-103, that of which is listed with the description Bearing Roller Rod End; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3110012117519, part number 1292035-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-211-7519 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 012117519 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1292035-103 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.7500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 5.7650 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7500 INCHES NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGGY | SHANK THREAD LENGTH | 2.5500 INCHES MINIMUM AND 2.5700 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.8750 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 1.2500 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 4.5000 INCHES NOMINAL |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 8.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | PLATING ON BEARING ONLY |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | COPPER ALLOY RETAINERCOPPER ALLOY RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 4140 OUTSIDE WASHERSSTEEL COMP 4140 OUTSIDE WASHERS |
| MATT | MATERIAL | STEEL COMP 4140 SLEEVESTEEL COMP 4140 SLEEVE |
| MATT | MATERIAL | STEEL COMP E4340 ROD END BODYSTEEL COMP E4340 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RINGSTEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLERSTEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RINGAISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE WASHERSAISI ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE WASHERS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE ROLLERAISI ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SLEEVEAISI ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODYMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,CONCAVE ROLLERS |
| TEST | TEST DATA DOCUMENT | 36659-LC72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
