| Part Number : 787008-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 3130-00-730-5365 (3130007305365) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 98897 | ||
| NIIN : 00-730-5365 (007305365) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 7870081 | |||
Thank you for taking an interest in part number 787008-1, that of which is listed with the description Bearing Unit Ball; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3130007305365, part number 787008-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 787008-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 3130-00-730-5365 (3130007305365) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 98897 | ||
| NIIN : 007305365 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 787008-1, that of which is listed with the description Bearing Unit Ball; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 3130007305365, part number 787008-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-730-5365 Item PartTypeName: BEARING UNIT,BALL | 3130 | 007305365 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 787008-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.2510 INCHES MINIMUM AND 0.2580 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.3120 INCHES MINIMUM AND 1.3130 INCHES MAXIMUM |
| ACYB | BASE THICKNESS | 0.4100 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 4.8200 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.0600 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 0.4750 INCHES MINIMUM AND 0.5250 INCHES MAXIMUM |
| AFWE | HOUSING WIDTH | 5.5800 INCHES NOMINAL |
| AGNF | BASE LENGTH | 0.3900 INCHES MINIMUM AND 0.4000 INCHES MAXIMUM |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AHZC | ASSEMBLY OVERALL LENGTH | 0.4750 INCHES MINIMUM AND 0.5250 INCHES MAXIMUM |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.6530 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| MATT | MATERIAL | ALUMINUM HOUSING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
