| Part Number : C7984 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5305-01-240-1278 (5305012401278) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 81755 | ||
| NIIN : 01-240-1278 (012401278) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number C7984, that of which is listed with the description Screw Close Tolerance; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5305012401278, part number C7984 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C7984 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5305-01-240-1278 (5305012401278) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 81755 | ||
| NIIN : 012401278 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number C7984, that of which is listed with the description Screw Close Tolerance; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5305012401278, part number C7984 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-240-1278 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012401278 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C7984 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.298 INCHES MINIMUM AND 0.348 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
