| Part Number : 204-001-768-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5306-00-604-3169 (5306006043169) | |||
| Item Name : Bolt Eye | CAGE Code : 80070 | ||
| NIIN : 00-604-3169 (006043169) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01853 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 2040017681 | |||
Thank you for taking an interest in part number 204-001-768-1, that of which is listed with the description Bolt Eye; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5306006043169, part number 204-001-768-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 204-001-768-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5306-00-604-3169 (5306006043169) | |||
| Item Name : Bolt Eye | CAGE Code : 80070 | ||
| NIIN : 006043169 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 204-001-768-1, that of which is listed with the description Bolt Eye; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5306006043169, part number 204-001-768-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-604-3169 Item PartTypeName: BOLT,EYE | 5306 | 006043169 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 204-001-768-001 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AATR | SHANK LENGTH | 1.390 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.250 INCHES NOMINAL |
| CWXM | EYE OUTSIDE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | SHANK IS UNDERCUT AT EYE 0.145 IN. MIN,0.165 IN. MAX W,0.285 IN. MIN,0.288 IN. MAX DIA,EYE IS DRILLED THROUGH LONG CROSS SECT.,0.094 IN. MIN,0.097 IN. MAX |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
