Part Number : 726026 | Manufacturer : Lockheed Martin Corporation | ||
NSN : 5310-00-532-8433 (5310005328433) | |||
Item Name : Washer Convex | CAGE Code : 98897 | ||
NIIN : 00-532-8433 (005328433) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15931 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 726026, that of which is listed with the description Washer Convex; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310005328433, part number 726026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 726026 | Manufacturer : Lockheed Martin Corporation | ||
NSN Number : 5310-00-532-8433 (5310005328433) | |||
Item Name : Washer Convex | CAGE Code : 98897 | ||
NIIN : 005328433 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 726026, that of which is listed with the description Washer Convex; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310005328433, part number 726026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-532-8433 Item PartTypeName: WASHER,CONVEX | 5310 | 005328433 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
726026 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.515 INCHES MINIMUM AND 0.524 INCHES MAXIMUM |
ABKV | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL |
ABPX | MATERIAL THICKNESS | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
CQBC | MINIMUM TENSILE STRENGTH | 150 POUNDS PER SQUARE INCH |
MATT | MATERIAL | STEEL COMP 8630 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
STYL | STYLE DESIGNATOR | CONVEX |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote