| Part Number : LS11170-22 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5310-00-579-2094 (5310005792094) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 98897 | ||
| NIIN : 00-579-2094 (005792094) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: LS1117022 | |||
Thank you for taking an interest in part number LS11170-22, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310005792094, part number LS11170-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LS11170-22 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5310-00-579-2094 (5310005792094) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 98897 | ||
| NIIN : 005792094 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number LS11170-22, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310005792094, part number LS11170-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-579-2094 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 005792094 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS509-22 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.594 INCHES NOMINAL |
| AGGP | DRILLED HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 1.851 INCHES MINIMUM AND 1.877 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 1.375 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 109.0 DEGREES MINIMUM NUT AND 111.0 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
