| Part Number : LS11170L5 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5310-00-754-4241 (5310007544241) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 98897 | ||
| NIIN : 00-754-4241 (007544241) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number LS11170L5, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310007544241, part number LS11170L5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LS11170L5 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5310-00-754-4241 (5310007544241) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 98897 | ||
| NIIN : 007544241 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number LS11170L5, that of which is listed with the description Nut Plain Hexagon; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5310007544241, part number LS11170L5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-754-4241 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 007544241 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS509-5L | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | LEFT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.219 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3B |
| AGGP | DRILLED HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
