| Part Number : 3P50004-131 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5340-00-075-4899 (5340000754899) | |||
| Item Name : Bracket Angle | CAGE Code : 98897 | ||
| NIIN : 00-075-4899 (000754899) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3P50004131 | |||
Thank you for taking an interest in part number 3P50004-131, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340000754899, part number 3P50004-131 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
3m italia spa
CAGE Code: A3445 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3w interface corp
CAGE Code: 4V367 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
12 volt shop
CAGE Code: Z0JM2 |
43 apple hill llc
CAGE Code: 6AKU8 |
|
3com sas
CAGE Code: F9930 |
3m health care service center
CAGE Code: 0UTW7 |
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
3d robotics llc
CAGE Code: 64TY6 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
3m unitek corporation
CAGE Code: 90444 |
| Part Number : 3P50004-131 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5340-00-075-4899 (5340000754899) | |||
| Item Name : Bracket Angle | CAGE Code : 98897 | ||
| NIIN : 000754899 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 3P50004-131, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340000754899, part number 3P50004-131 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-075-4899 Item PartTypeName: BRACKET,ANGLE | 5340 | 000754899 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 487990 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.900 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.631 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | W/S: ENGINE,AIRCRAFT,TF-33-P-7 (C-141A/B) |
| AHLF | SECOND LEG WIDTH | 1.300 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.281 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.857 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.884 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.374 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.160 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.160 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| AJFP | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 159.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | LEFT HAND |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
