| Part Number : 16L362-7 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5340-01-047-6555 (5340010476555) | |||
| Item Name : Bracket Angle | CAGE Code : 81755 | ||
| NIIN : 01-047-6555 (010476555) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 16L3627 | |||
Thank you for taking an interest in part number 16L362-7, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340010476555, part number 16L362-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 16L362-7 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5340-01-047-6555 (5340010476555) | |||
| Item Name : Bracket Angle | CAGE Code : 81755 | ||
| NIIN : 010476555 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 16L362-7, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340010476555, part number 16L362-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-047-6555 Item PartTypeName: BRACKET,ANGLE | 5340 | 010476555 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 16L362-7 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F-16 ACFT |
| AHLF | SECOND LEG WIDTH | 2.880 INCHES NOMINAL |
| AHLH | SECOND LEG END WIDTH | 0.380 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.251 INCHES MINIMUM AND 0.254 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.619 INCHES MINIMUM AND 0.622 INCHES MAXIMUM |
| AHLQ | SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 2.100 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.400 INCHES NOMINAL |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.050 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.390 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.610 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.140 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.880 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 2.000 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.680 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.600 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE AND TAPERED |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE AND TAPERED |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | F-16 ACFT |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4-T851 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
