Part Number : 77C709308P005 | Manufacturer : Lockheed Martin Corporation | ||
NSN : 5340-01-150-1169 (5340011501169) | |||
Item Name : Clamp Loop | CAGE Code : 03538 | ||
NIIN : 01-150-1169 (011501169) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 17532 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 77C709308P005, that of which is listed with the description Clamp Loop; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340011501169, part number 77C709308P005 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 77C709308P005 | Manufacturer : Lockheed Martin Corporation | ||
NSN Number : 5340-01-150-1169 (5340011501169) | |||
Item Name : Clamp Loop | CAGE Code : 03538 | ||
NIIN : 011501169 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number 77C709308P005, that of which is listed with the description Clamp Loop; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340011501169, part number 77C709308P005 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-150-1169 Item PartTypeName: CLAMP,LOOP | 5340 | 011501169 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
MS21104C4 | 5 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT AND WEATHER RESISTANT |
ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
ABMZ | DIAMETER | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.064 INCHES NOMINAL |
AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.547 INCHES NOMINAL |
AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.797 INCHES NOMINAL |
BZTN | LOOP INSIDE DIAMETER | 0.250 INCHES NOMINAL |
MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR CUSHION |
MATT | MATERIAL | STEEL COMP 347 BAND |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BAND |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
SFTT | SURFACE TREATMENT | PASSIVATE BAND |
STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote