| Part Number : LS10191C48T | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5340-01-250-0697 (5340012500697) | |||
| Item Name : Clamp Loop | CAGE Code : 98897 | ||
| NIIN : 01-250-0697 (012500697) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number LS10191C48T, that of which is listed with the description Clamp Loop; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340012500697, part number LS10191C48T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LS10191C48T | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5340-01-250-0697 (5340012500697) | |||
| Item Name : Clamp Loop | CAGE Code : 98897 | ||
| NIIN : 012500697 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number LS10191C48T, that of which is listed with the description Clamp Loop; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340012500697, part number LS10191C48T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-250-0697 Item PartTypeName: CLAMP,LOOP | 5340 | 012500697 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS10191C48T | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| BZTN | LOOP INSIDE DIAMETER | 2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE CUSHION |
| MATT | MATERIAL | STEEL COMP 302 BAND OR STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE BAND OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | CENTER MOUNT |
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.051 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.990 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 2.209 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
