| Part Number : LS5998P7-8 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5340-01-324-0591 (5340013240591) | |||
| Item Name : Bracket Angle | CAGE Code : 98897 | ||
| NIIN : 01-324-0591 (013240591) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: LS5998P78 | |||
Thank you for taking an interest in part number LS5998P7-8, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340013240591, part number LS5998P7-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LS5998P7-8 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5340-01-324-0591 (5340013240591) | |||
| Item Name : Bracket Angle | CAGE Code : 98897 | ||
| NIIN : 013240591 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number LS5998P7-8, that of which is listed with the description Bracket Angle; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5340013240591, part number LS5998P7-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-324-0591 Item PartTypeName: BRACKET,ANGLE | 5340 | 013240591 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS5998P7-8 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.747 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 0.390 INCHES NOMINAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLL | SECOND LEG LENGTH | 0.810 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHLH | SECOND LEG END WIDTH | 0.390 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CHAMFERED ENDS |
| AKBU | SECOND LEG STYLE | CHAMFERED ENDS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CWPD | FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND FULL HARD MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| CWPG | SECOND LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| AHLK | FIRST LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
