| Part Number : P815-4C | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5365-01-273-8408 (5365012738408) | |||
| Item Name : Shim | CAGE Code : 81755 | ||
| NIIN : 01-273-8408 (012738408) | |||
| FSC Code : 5365 Bushings Rings Shims and Spacers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20349 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: P8154C | |||
Thank you for taking an interest in part number P815-4C, that of which is listed with the description Shim; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5365012738408, part number P815-4C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : P815-4C | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5365-01-273-8408 (5365012738408) | |||
| Item Name : Shim | CAGE Code : 81755 | ||
| NIIN : 012738408 | |||
| FSC CODE : 5365 Bushings Rings Shims and Spacers | |||
Thank you for taking an interest in part number P815-4C, that of which is listed with the description Shim; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5365012738408, part number P815-4C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-01-273-8408 Item PartTypeName: SHIM | 5365 | 012738408 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| P815-4C | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.830 INCHES MINIMUM AND 1.890 INCHES MAXIMUM |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.890 INCHES MINIMUM AND 0.950 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AECS | BOLT HOLE QUANTITY | 4 |
| AGAV | END ITEM IDENTIFICATION | ROTARY ACTUATOR/INSTALLATION,F-16C/D COMMON |
| CQCF | CONSTRUCTION | ONE-PIECE |
| FEAT | SPECIAL FEATURES | 8TWO HOLES 0.302 IN. MIN AND 0.322IN. MAX ON ONE SIDE AND TWO HOLES 0.365 IN. MIN AND 0.385 IN. MAX ON OPPOSITE END; TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 1.830 IN. MIN AND 1.890 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGR |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
