| Part Number : GVL20404-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5905-00-115-8076 (5905001158076) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 08241 | ||
| NIIN : 00-115-8076 (001158076) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: GVL204041 | |||
Thank you for taking an interest in part number GVL20404-1, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905001158076, part number GVL20404-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2mb international
CAGE Code: FA7N3 |
2001 humana press inc
CAGE Code: 34CH3 |
|
21st century electronics inc
CAGE Code: 60092 |
3m alaska
CAGE Code: 0NZU5 |
|
3m belgium nv
CAGE Code: B2281 |
3m norge a s
CAGE Code: N0447 |
|
4 s mfg
CAGE Code: 0D9C0 |
3m co health care services sales
CAGE Code: 0Z2D0 |
|
5 11 inc
CAGE Code: 3YEL6 |
24 hour distributors
CAGE Code: 12136,3WKM0 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
3075109 canada inc
CAGE Code: L09L0 |
|
3 star papers limited
CAGE Code: 3DNS9 |
3 l filters ltd
CAGE Code: 37941 |
|
3gen corporation
CAGE Code: 3SPS3 |
| Part Number : GVL20404-1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5905-00-115-8076 (5905001158076) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 08241 | ||
| NIIN : 001158076 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number GVL20404-1, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905001158076, part number GVL20404-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-115-8076 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 001158076 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 719123-1 | B | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABHP | OVERALL LENGTH | 0.390 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.074 INCHES MINIMUM |
| ABTD | MOUNTING SLOT WIDTH | 0.074 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.414 INCHES MINIMUM AND 0.424 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE FROM ADJUSTMENT CONTROL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE AND SLOT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 08241-GVL20404 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
