| Part Number : A3318-3 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5905-00-459-2548 (5905004592548) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 03538 | ||
| NIIN : 00-459-2548 (004592548) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: A33183 | |||
Thank you for taking an interest in part number A3318-3, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905004592548, part number A3318-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m norge a s
CAGE Code: N0447 |
3d evolution ltd
CAGE Code: KD959 |
|
2001 humana press inc
CAGE Code: 34CH3 |
20th century fiberglass
CAGE Code: 80241 |
|
3 ring inc
CAGE Code: 68310 |
3 dimensional engineering inc
CAGE Code: 1HLX4 |
|
3ps inc
CAGE Code: 1MHK2 |
43 apple hill llc
CAGE Code: 6AKU8 |
|
5s components inc
CAGE Code: 1LNJ8 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
3m co health care services sales
CAGE Code: 0Z2D0 |
360 tents l l c
CAGE Code: 4CT45 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
3m purification pty limited
CAGE Code: Z5295 |
|
1064100 alberta ltd
CAGE Code: L0C80 |
| Part Number : A3318-3 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5905-00-459-2548 (5905004592548) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 03538 | ||
| NIIN : 004592548 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number A3318-3, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905004592548, part number A3318-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-459-2548 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 004592548 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RH50-25R-F | E | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | 24.900 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAPZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AAQA | HEAT SINK LENGTH | 7.000 INCHES |
| AAQB | HEAT SINK WIDTH | 5.000 INCHES |
| AAQD | HEAT SINK HEIGHT | 2.000 INCHES |
| AAQE | HEAT SINK THICKNESS | 0.040 INCHES |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AAQZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | 0.438 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.938 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.594 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.562 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| MATT | MATERIAL | ALUMINUM ALLOY HEAT SINK |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
