| Part Number : 255-00HS5K | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5905-00-764-4866 (5905007644866) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 94271 | ||
| NIIN : 00-764-4866 (007644866) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 25500HS5K | |||
Thank you for taking an interest in part number 255-00HS5K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905007644866, part number 255-00HS5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 source electronics inc
CAGE Code: 551K1 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
259 holdings ltd
CAGE Code: 431P3 |
4 s mfg
CAGE Code: 0D9C0 |
|
3m nederland b v
CAGE Code: H1248 |
10zig technology inc
CAGE Code: 49E04 |
|
3m company communication markets
CAGE Code: 0VGY3 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
3m italia spa
CAGE Code: A3445 |
3m company health care mfg
CAGE Code: 04515 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3 l filters ltd
CAGE Code: 37941 |
|
0mcc inc
CAGE Code: 12156 |
3d
CAGE Code: 0WY47 |
|
5605 n illinois inc
CAGE Code: 089F4 |
| Part Number : 255-00HS5K | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5905-00-764-4866 (5905007644866) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 94271 | ||
| NIIN : 007644866 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 255-00HS5K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905007644866, part number 255-00HS5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-764-4866 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007644866 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 215-00H5K | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.657 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.035 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.411 INCHES MINIMUM AND 0.426 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
