| Part Number : 77C703626P1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5905-00-811-5859 (5905008115859) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 03538 | ||
| NIIN : 00-811-5859 (008115859) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37407 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 77C703626P1, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905008115859, part number 77C703626P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
12 volt shop
CAGE Code: Z0JM2 |
|
2056 company
CAGE Code: 7F967 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3 d machining inc
CAGE Code: 09SY7 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
17th st photo supply inc
CAGE Code: 1VV61 |
|
3m health care ltd
CAGE Code: U5989 |
3 m federal systems dept
CAGE Code: 68352 |
|
3g shielding specialties lp
CAGE Code: 7PCU6 |
1 source electronics inc
CAGE Code: 551K1 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
3dfx interactive
CAGE Code: KA796 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
| Part Number : 77C703626P1 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5905-00-811-5859 (5905008115859) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 03538 | ||
| NIIN : 008115859 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 77C703626P1, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905008115859, part number 77C703626P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-811-5859 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 008115859 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G3-10205-6 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.985 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.252 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 0.349 MINIMUM AND 0.351 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.766 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0600 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0560 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
