| Part Number : 7618354P3 | Manufacturer : Lockheed Martin Corporation | ||
| NSN : 5905-00-868-3726 (5905008683726) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 99971 | ||
| NIIN : 00-868-3726 (008683726) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 7618354P3, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905008683726, part number 7618354P3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7618354P3 | Manufacturer : Lockheed Martin Corporation | ||
| NSN Number : 5905-00-868-3726 (5905008683726) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 99971 | ||
| NIIN : 008683726 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 7618354P3, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Lockheed Martin Corporation and listed alongside the NSN 5905008683726, part number 7618354P3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-868-3726 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008683726 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3250L-1-501 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.530 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.187 INCHES NOMINAL |
| ABTD | MOUNTING SLOT WIDTH | 0.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.075 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.035 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.187 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | SLOT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 99971-7618354 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
