| Part Number : MIL-L-13896E | Manufacturer : Lodge And Shipley Manuflux | ||
| NSN : 3416-01-303-0508 (3416013030508) | |||
| Item Name : Lathe Engine | CAGE Code : 80315 | ||
| NIIN : 01-303-0508 (013030508) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MILL13896E | |||
Thank you for taking an interest in part number MIL-L-13896E, that of which is listed with the description Lathe Engine; Manufactured by Lodge And Shipley Manuflux and listed alongside the NSN 3416013030508, part number MIL-L-13896E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MIL-L-13896E | Manufacturer : Lodge And Shipley Manuflux | ||
| NSN Number : 3416-01-303-0508 (3416013030508) | |||
| Item Name : Lathe Engine | CAGE Code : 80315 | ||
| NIIN : 013030508 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number MIL-L-13896E, that of which is listed with the description Lathe Engine; Manufactured by Lodge And Shipley Manuflux and listed alongside the NSN 3416013030508, part number MIL-L-13896E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| APGF | Design Type | SCREW |
| ACDC | Current Type | DC |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| AWLX | Electric Motor Quantity | 2 |
| AAXX | Mounting Type | FLOOR |
| ASHK | Electric Motor Horsepower Rating | 50.000 |
| ADQR | Center To Center Distance | 48.000 INCHES MINIMUM AND 168.000 INCHES MAXIMUM |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | HEAVY DUTY |
| FAAZ | Phase | THREE |
| FEAT | Special Features | VOLTAGE AVAILABLE ALSO IN 230/460;SPINDLE SPEED QTY IS VARIABLE;CTR TO CTR DISTANCE INCREASES IN 24 INCH INCREMENTS;BED LG 144.0 IN.;LG OF GAP 22.0 IN. |
| BTTB | Spindle Speed Range In Rpm | +7.0/+650.0 |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 40.000 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 55 |
| BTWC | Rated Swing Through Open Gap | 54.000 INCHES NOMINAL |
| BTWD | Actual Swing Through Open Gap | 58.000 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 44.000 INCHES NOMINAL |
| BTWG | Actual Swing Over Closed Gap | 46.000 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| FREQ | Frequency In Hertz | 60.0 |
| BTWM | Headstock Center Taper Size Designator | 6 MORSE |
| BTYN | Hollow Spindle Hole Size | 12.500 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| AKYD | Accessory Components And Quantity | TAPER ATTACH,1;STEADY REST,2;FOUR WAY TOOL BLOCK,1" |
| BTYT | Carriage Feed Change Quantity | 55 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +1.0/+64.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
