| Part Number : 117-0520 | Manufacturer : M K Products Inc | ||
| NSN : 5905-01-304-0504 (5905013040504) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 50623 | ||
| NIIN : 01-304-0504 (013040504) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1170520 | |||
Thank you for taking an interest in part number 117-0520, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by M K Products Inc and listed alongside the NSN 5905013040504, part number 117-0520 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 117-0520 | Manufacturer : M K Products Inc | ||
| NSN Number : 5905-01-304-0504 (5905013040504) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 50623 | ||
| NIIN : 013040504 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 117-0520, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by M K Products Inc and listed alongside the NSN 5905013040504, part number 117-0520 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-304-0504 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 013040504 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 117-0520 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| ABXF | SHAFT LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1080.0 NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | HOLE DRILLED IN SHAFT |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/0.25 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| ABPM | BODY DIAMETER | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
