| Part Number : 25-50 | Manufacturer : Makino Inc | ||
| NSN : 3416-00-528-7903 (3416005287903) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 00-528-7903 (005287903) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 2550 | |||
Thank you for taking an interest in part number 25-50, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416005287903, part number 25-50 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 25-50 | Manufacturer : Makino Inc | ||
| NSN Number : 3416-00-528-7903 (3416005287903) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 005287903 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 25-50, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416005287903, part number 25-50 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | HEAVY DUTY |
| ACDC | Current Type | AC |
| AWLX | Electric Motor Quantity | 1 |
| FREQ | Frequency In Hertz | 60 |
| AKSL | Purpose For Which Designed | GENERAL |
| BTWD | Actual Swing Through Open Gap | 56.000 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 6 MORSE |
| BTYT | Carriage Feed Change Quantity | 48 |
| AWHA | Bed Type | SLIDING GAP |
| FAAZ | Phase | THREE |
| AAXX | Mounting Type | FLOOR |
| AKYD | Accessory Components And Quantity | NONE SPECIFIED |
| APGF | Design Type | SCREW |
| BTSZ | Spindle Speed Quantity | 16 |
| BTWB | Thread Change Quantity | 48 |
| BTWG | Actual Swing Over Closed Gap | 30.500 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTYP | Hole Diameter Through Spindle | 2.250 INCHES NOMINAL |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYW | Gear Change Type | QUICK |
| BTTB | Spindle Speed Range In Rpm | 0.008125 |
| BTTG | Swing Over Cross Slide | 19.500 INCHES NOMINAL |
| BTWJ | Distance Between Open Centers | 156.000 INCHES NOMINAL |
| BTWK | Distance Between Closed Centers | 96.000 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTZR | Thread Quantity Range | +0.750/+46.000 PER INCH |
| ASHK | Electric Motor Horsepower Rating | 25 |
| MRC | Decoded Requirement | Clear Text Reply |
| ZZZY | Reference Number Differentiating Characteristics | BTWJ,BTWK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
