| Part Number : 13C3 | Manufacturer : Makino Inc | ||
| NSN : 3416-00-618-1584 (3416006181584) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 00-618-1584 (006181584) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 13C3, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416006181584, part number 13C3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 13C3 | Manufacturer : Makino Inc | ||
| NSN Number : 3416-00-618-1584 (3416006181584) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 006181584 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 13C3, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416006181584, part number 13C3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | FLOOR |
| ASHK | Electric Motor Horsepower Rating | 3.000 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY CENTER TO CENTER DISTANCE,SPINDLE SPEED RANGE IN RPM AND ELECTRIC MOTOR HORSEPOWER RATING" |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 24 |
| BTTB | Spindle Speed Range In Rpm | +30.0/+1800.0 |
| BTTD | Rated Swing | 15.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 15.500 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 9.500 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED" |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.531 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| FREQ | Frequency In Hertz | 60.0 |
| AKYD | Accessory Components And Quantity | PER MIL-STD 931 |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
